RC Airplane High Power 3W Flight Simulated And Flashing Light System

Features

• Simulates the realistic lighting of real aircraft
• Low voltage detection, when the battery voltage is lower than 6.8V, all lights flash
• 8 light group interface, red anti-collision lights, white flashing lights, navigation lights, landing lights
• 8 operating modes, which can be connected to any switched channel on your receiver
• Designed according to the standard of aircraft lights which makes your aircraft more realistic and shine

Specification

• Input voltage: 2S LiPo Battery
• Working current: 1200mA
• LED cable length: 800mm 31 inch
• Power cable length: 300mm 12 inch
• Weight: 100g

Product mode
After connecting the wires，enter the operating modes. Through the control of remote control switch can enter into the 8 operating modes.
Mode 1: Civil aviation standards; the left red light and the right green light are always on, the flashing lights are flashing in highest speed，the beacon light is flashing in highest speed at a certain frequency，the landing lights are off or on circularly.
Mode 2: Civil aviation standards; the left red light , the right green light and the flashing lights are flashing in highest speed at a certain frequency，the beacon light is flashing in highest speed at a certain frequency，the landing lights are off or on circularly.
Mode 3 and Mode 4：Flash alternately; left side flash two times, right side flash two times, changing differently.
Mode 5: The left red light, the right green light and the flashing lights are always on, the beacon light is flashing in highest speed at a certain frequency，the landing lights are off or on circularly.
Mode 6: Emergency forced landing light flashing mode; all the lights are quickly flashing in highest speed at a certain frequency.
Mode 7: Normal cruise flashing, with all the lights flash slowly.
Mode 8: All the lights are on.
Mode 9: All the lights are off.